EPM-2422低揮發灌封膠

LIFE SCIENCES

EPM-2422
Low Volatility Silicone Elastomer

Description
Two-part, low viscosity clear RTV silicone
Designed for enhanced performance in extreme low and high temperatures
10:1 Mix Ratio (Part A: Part B)
Applications
To provide protection of electric components and assemblies against shock, vibration, moisture, dust, chemicals and other environmental hazards
Low viscosity for applications requiring superior flow

Properties tested on a lot-to-lot basis. Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Instructions for Use

Packaging
37 mL SxS Kit
50 Gram Kit
100 Gram Kit
500 Gram Kit
Warranty
6 Months
Mixing
Mix in a ration of 1:1:0.1, Part A: Part B: Part C. If mixing by hand, take care to minimize air entrapment while mixing.

Vacuum Deaeration
Remove air entrapped during mixing by common vacuum deaeration procedure, observing all applicable safety precautions. Slowly apply vacuum, up to 28 inches Hg, to a container rated for use and of volume at least four times that of material being deaerated. Hold vacuum until presence of air is no longer evident.

Substrate Consideration
Cures in contact with most materials common to electronic assemblies. Exceptions include butyl and chlorinated rubbers, some RTV silicones and unreacted residues of some curing agents. Units being encapsulated or potted should be clean and free of surface contaminants. Containers and dispensers should also be clean and dry. Prevent cure inhibition by washing all containers with clean solvent or volatizing the contaminants by heat.

Note: Some bonding applications may require the use of a primer. NuSil Technology LLC CF1-135 silicone primer is recommended.

Adjustable Cure Schedule
Product cures at room temperature and a wide range of elevated temperatures and cure times to accommodate different production needs. Contact NuSil Technology LLC for details.

Specifications
Do not use the properties shown in this technical profile as a basis for preparing specifications. Please contact NuSil Technol ogy for assistance and recommendations in esta blishing particular specifications.

Warranty Information
The warranty period provided by NuSil Technology LLC (hereinafter "NuSil Technology") is 12 months from the date of shipment when stored below 40°C in original unopened containers. Unless NuSil Technology provides a specific written warranty of fitness for a particular use, NuSil Technology's sole warranty is that the product will meet NuSil Technology's then current specification. NuSil Technology specifically disclaims all other expressed or implied warranties, including, but not limited to, warranties of merchantability and fitness for use. The exclusive remedy and NuSil Technology's sole liability for breach of warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. NuSil Technology expressly disclaims any liability for incidental or consequential damages.

Warnings About Product Safety
NuSil Technology believes, to the best of its knowledge, that the information and data contained herein are accurate and reliable. The user is responsible to determine the material's suitability and safety of use. NuSil Technology cannot know each application's specific requirements and hereby notifies the user that it has not tested or determined this material's suitability or safety for use in any application. The user is responsible to adequately test and determine the safety and suitability for their application and NuSil Technology makes no warranty concerning fitness for any use or purpose. NuSil Technology has completed no testing to establish safety of use in any medical application.

NuSil Technology has tested this material only to determine if the product meets the applicable specifications. (Please contact NuSil Technology for assistance and recommendations when establishing specifications.) When considering the use of NuSil Technology products in a particular application, review the latest Material Safety Data Sheet and contact NuSil Technology with any questions about product safety information.

Do not use any chemical in a food, drug, cosmetic, or medical application or process until having determined the safety and legality of the use. The user is responsible to meet the requirements of the U.S. Food and Drug Administration (FDA) and any other regulatory agencies. Before handling any other materials mentioned in the text, the user is advised to obtain available product safety information and take the necessary steps to ensure safety of use.

Patent / Intellectual Property Warning
NuSil Technology disclaims any expressed or implied warranty against the infringement of any domestic or international patent/intellectual property right. NuSil Technology does not warrant the use or sale of the products described herein will not infringe the claims of any domestic or international patent/intellectual property right covering the product itself, its use in combination with other products, or its use in the operation of any process.

親--注意：部分產品有最小起訂量限制，具體聯系客服，謝謝合作！

切記：本店所有產品均為正品，勿拿仿品來議價。

重要提醒：
初次光顧本店或 接觸粘合劑的務必閱買家須知，或者瀏覽公司網站，內有大量的黏膠基礎知識及關于快遞運輸、包裝、漏膠、膠水常識等煩惱與困惑的問題給您些提醒與解釋。

發貨時間：
確定寶貝后一般按照支付的先后順序發出，產品庫存變動較快，頁面數量不代表商品實際數量，請MM在確定購買前詢問是否有貨。如在拍下付款后出現斷貨現象，店主會主動或電話聯系，可以選擇等待、換其他產品或者退款。望能諒解!

溫馨提示：我們只能保證貨物及時發出，不能保證您確定幾時能一定收到，若超出正常時間還未收到，請及時通知掌柜，我們會盡一切能力為您查明原因并催快遞公司盡快將您的貨送到

同樣的價格我們比質量；

同樣的質量我們比服務；

同樣的服務我們比效率；

本店通過銀行匯款，請聯系店主(款到發貨)。

匯好款請短信通知（全天開機），并發送確認購買商品，買家收貨地址，聯系電話及聯系人！
匯款途徑：￥網上銀行 ￥ATM機轉賬 ￥銀行匯款
溫馨提醒：去銀行匯款要帶 以免白跑一趟

感謝新老客戶的合作，歡迎您下次光臨本店，謝謝！

1．因為本家的多數產品為液體膠粘劑與罐裝液體，拍前請先與我方聯系確認現貨情況.,郵寄方試及郵費。支付后請給個消息以免耽誤發貨.敬請見諒理解！謝謝大家.

2．到達時間因所選方式及所在的地區遠近而定，一般快遞2一5天。快遞超過５天，平郵超過１５天，請聯系查詢。

總之有什么不愉快請聯系我們，我們會積極跟快遞公司溝通解決,我們會致以真誠的歉意，但比所有這些更重要的，是您的寬容。希望您能夠體諒我們的本意 不是讓您經歷這些不愉快；希望您也能夠體諒那些工資不高、櫛風沐雨的快遞員。

2662622386