產品分類 更多>>
型號：RF射頻20鍵鋁殼控制器
●工作溫度： -20-60℃
●供電電壓： 直流DC12~24V
●功能模式： 14種
●輸出： 3回路
●連接方式： 共陽（可定做共陰）
●外型尺寸： L114×W64×H25 mm
●包裝尺寸： L145×W95×H51 mm
●凈 重： 185g
●毛 重： 205g
●輸 出：三路CMOS漏極開路輸出
●最大輸出電流：每路4A
●輸出功率： 12V<144W，24V<216W
●可控制：5050燈條10米（60燈/米）；20米（30燈/米）
注意事項：
1、本標準產品供電電壓為DC12V~24V，不得接到其他電壓上；
2、引出線應按照接線圖提供的顏色和標號，正確接線；
3、本產品不可超負荷使用；
4、本產品的質保期為1年，但不包括人為損壞或超負荷工作的情形。
12V 12A / 3 channels Heavy-duty Aluminum RGB Controller with RF 20key remote
Description
This is wireless RF controller with a small but powerful remote created by advanced Radio Frequency technology. Difference between RFand IR remote: IR (infrared remote ) use light and require line of sight to operate the device. RF(radio frequency) remotes use radio waves and does not require line of sight to operate the device.
You can control LED RGB multi-color devices up to 144 watts with this controller. The unit has a 20 keys that can achieve functions of flashing, strobe and gradual changing. You can also adjust brightness and speed level of your LED lights.
This unit is an excellent choice for automotive LED lighting or any other 12V LED lighting application since it can work with multiple strips with mini terminal screws for R,G,B and common anode(12+) leads; spring clip connectors for your 12VDC input.
Technical parameters
Working temperature: -20-60°C
Supply voltage: DC12~24V
Output: 3 channels
Transmission/receiving frequency:433MHz
Remote distance: 10~15M
Controller dimension:L114×W64×H25 mm
Remote dimension:L85×W52×H7 mm
Packing size:L145×W95×H51 mm
Net weight: 185g
Gross weight: 205g
Static power consumption: <1 W
Max output current: 4 A each color/channel
Output:Three CMOS drain-open output
Connecting Mode:Common anode
Output power: 12V: <144W, 24V: <288W
Direction for use
1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
2. Standard changes as follows:
Button | Button description | remarks |
| ON/OFF | you could turn on or turn off the output of controller |
| Play/Stop | Play or stop led changing, easy to observe led static effect |
| Brightness increase | the brightness series will add once when you press it |
| Brightness decrease | The brightness series will reduce once when you press it |
RED | Static red | Brightness is adjustable,Speed is unadjustable. |
GREEN | Static Green | |
BLUE | Static Blue | |
WHITE | Static white | |
ORANGE | Static Orange | |
YELLOW | Static Yellow | |
CYAN | Static cyan | |
PURPLE | Static Pink | |
AUTO | Automation | Moving all the modles automationly |
JUMP3 | 3 Color step change | Speed and brightness are adjustable |
FADE3 | 3 Color fade change | Speed is adjustable,brightness is unadjustable |
SPEED+ | Speed increase | The speed will add once when you press it. |
FLASH | Seven colors flash frequency | Speed and brightness are adjustable |
JUMP7 | 7 Color step change | |
FADE7 | 7 Color fade change | Speed is adjustable,brightness is unadjustable |
SPEED- | Speed decrease | The speed series will reduce once when you press it |
Connecting Diagram
primary mode
secondary mode
NOTE:
Only one power supply will be connected to RF Controller,primary or secondary mode.
Application:
Applied on 20 meters of SMD5050 30LEDs/m RGB LED Strips or 10 meters of SMD5050 60LEDs/m RGB LED Strips
