accessory

Used for Bosch in line pumps of K,M,MW,A,B,BV,P(ZU,ZW,ZM) and BOSCH rotative distributor injection pumps EP/VA,EP/VM,VE….F…,also used for Chinese pumps such asⅠ,Ⅱ,Ⅲ,K,P7,BQ.etc.

Main function
1. Measurement of each cylinder delivery at any speed
2. Test point and interval angle of oil supply of injection pump.
3. Checking and adjust the mechanical governor.
4. Checking and adjusting the distributor pump.
5. .Experiment and adjusting of behavior of supercharging and compensatory device.
6. Measurement of oil return of distributing pump
7. Testing of the electromagnetic valve of distributor pump.(12V/24V)
8. Measurement of the internal pressure of distributor pump.
9. Checking the sealing of injection pump body
10. Install tube of auto-sucking oil supply can check on oil supply pump(including VE pump.)
11. Checking the travel of stroke(optional)
12. oil lubricate(optional)
13. forced cooling system(optional)
● 主要功能
1.噴油泵各缸供油量和供油均勻性
2.噴油泵供油點及供油間隔角度
3.調速器工作性能的檢查和調整
4.分配泵工作性能的試驗調整
5.增壓補償器性能的試驗調整
6.分配泵回油量的測量
7.分配泵電磁閥性能的測試(12v/24v)
8.分配泵各種規定轉速下的內壓測定
9.噴油泵密封性能試驗
10.接上自吸供油管可對輸油泵(包括VE泵)進行檢查
11.齒桿行程的高精度檢測(選裝)
12.機油潤滑（選裝）

13.強制制冷（選裝）

Technical characteristic技術特性表