無錫特瑞環保材料有限公司，生產濾筒除塵。脈沖褶式長濾筒。TR/L長濾筒專門用作新型脈沖濾筒除塵器和布袋除塵器改造，有上裝和下裝兩種，接頭安裝形式有三耳鑄鋁、聚氨酯、金屬端蓋等。可取代底部和頂部安裝形式的濾袋和籠骨，適用于大多數MIKROPUL、KLEX-KLEEN和其他使用文氏管、套筒的花板結構完全替代BHA相關產品。 細紗粘合聚酯，130°C持續工作溫度 濾料堅挺，寬褶設計，更好的清灰性能，過濾效率高 快速拆裝接頭，安裝方便，省時省力 在相同體積下，濾筒比濾袋可多3倍的過濾面積 工作阻力明顯降低，能耗大大降低。 可提供的濾材可選擇防油防水處理、防靜電處理、PTFE覆膜處理。 Pulse length pleated cartridge TR / L used as a new type of specialized long-pulse cartridge dust collector and bag filter cartridge transformation, there are two types of upload and download, install the form of joint three ears cast aluminum, polyurethane, metal end caps and so on. Can be installed to replace the form at the bottom and the top of the bag and the cage of bone, applicable to most MIKROPUL, KLEX-KLEEN and other use of Venturi tubes, flower sleeve plate BHA related to entirely replace imported products Imports bonded polyester spun yarn, 130 ° C continuous operating temperature Media firm, wide-fold design, a better cleaning performance, high filtration efficiency Rapid dismantling joints, installation convenience, save time and manpower In the same volume, the filter bag can be more than 3 times the filter area Working resistance decreased significantly reduce energy consumption Choice of available oil filter water treatment, anti-static handle, PTFE film processing 參數/Specification 濾筒型號 Model 花板直徑B.D 端蓋材質 G.T 頂部直徑 T.D 底部直徑 B.D 1米長過濾面積 Filtration surface/1 2米長過濾面積 Filtration surface/2 TR/L1510/1520 Φ162mm 聚氨酯 Φ169 mm Φ150mm 2.3m2 4.6 m2 TR/ L1461/1462 Φ162mm 鍍鋅金屬 Φ178mm Φ146 mm 2.3 m2 4.6 m2 TR/ L1410/1420 Φ159mm 聚氨酯 Φ169mm Φ145mm 2.3 m2 4.6 m2 TR/ L1441/1442 Φ159mm 鍍鋅金屬 Φ178mm Φ144mm 2.1m2 4.1m2 TR/ L/1210/1220 Φ133mm 聚氨酯 Φ142mm Φ120mm 2.0 m2 4.0 m2 TR/ L/1211/1212 Φ133mm 鍍鋅金屬 Φ152mm Φ121mm 1.5 m2 3.0 m2