特點：Advantages: 1、可視位置指示：可接限位開關或緊急手動裝置。 1. Seeable Location Indicator: Be able to access the limit switches and handwheel 2、容易安裝：氣控頭可以作360°旋轉，甚至限位開關也可以360°旋轉。可方便地安裝一到二個限位開關。 2. Easy to install: Pneumatic actuators and limit switches can be made into rotation in any 360-degree; easy to install one and two limit switches 3、先進的氣動控制器：加厚工程塑料外殼，安全。低磨損的活塞結構，容量大而低耗氣量。內部元件自潤滑，免維護。 3. Advanced pneumatic actuator: using thicken Engineering plastics shell to insure valve safty; low wear and tear by the piston structure; high capacity and low air consumption; internal components is self-lubricating and maintenance-free. 4、容易連接：MAMUR標準連接，嵌入式金屬接頭。可選更小的控制頭。 4. Easy to connect: MAMUR standard connection and inbuilt metal connector are suitable for smaller size actuator 5、長壽命導桿：閥桿契形特氟隆（PTEE）密封，避免臟物導入。自潤滑，免維護。閥桿經特別處理以確保固定，并能自動校正位置。 5. Long life steam: valve steam uses wedge-shaped PTFE to avoid the dirty; steam are self-lubricating and maintenance-free; after special processing, stem is ensured to be strong, and also can correct position automatically 6、無水錘作用：流體從閥桿下方流入時，水錘（水沖擊力）被吸收。 6. No water hammer: when fluid flows from under the steam, water hammer will be absorbed. 7、先進的閥體機構：流量比普通角座大30%，體積更小，流體流態更優。 7. Advanced valve body design: the flow of this angle seat valve is 30% more than the regular 8、不銹鋼316閥體，特氟隆密封，耐高溫，耐腐蝕。壽命高達五百萬次上，單作用角座閥具有結構簡單、造型美觀、裝拆快捷，開關迅速，操作靈活，流體阻力小，使用安全等優點。 8. 316 stainless steel material and PTFE sealing are resistant to high-temperatur and erosion; the usage times can be more than FIVE MILLION times; Single Acting pneumatic angle seat valve is artistic-shape, easy- disassembly, quick on-of, flexible-operation, small fluid resistance, safe and reliable usage.