FLUXODUR 56-O Self-Shielded Flux Cored Wire for Hard Facing 堆焊用自保護藥芯焊絲 Standards: DIN 8555 MF 6-GF-60-G 標準：DIN 8555 MF 6-GF-60-G Applications & Properties: 特性和應用： Alloy developped for the protection against mineral abrasion under tough constraints or shocks for temperature up to 350℃. Good resistance to wear-off metal against metal. Deposit of martensitic type. Protection of wearing parts in civic construction field: teeth, cups. Extrusion screw, cement clay, coal conveyors screws in mines,brick yards, quarries. Deposit on manganese steel possible. 該焊絲是為防止強應力下的礦物質磨損和為防止350℃以下的操作溫度所產生的沖擊而設計的。 對金屬具有良好的耐磨損性能。 馬氏體型熔敷。 可以保護T.P.、輪齒、鏟斗等磨損件。 用于水泥廠、粘土廠、炭場、礦場、磚窯場的擠壓螺釘和輸送螺釘。 可以堆焊在錳鋼上。 Weld metal analysis (typical valus in%): 熔敷金屬的化學成份（正常值%） C Si Mn Mo V Cr 0．50 3 2.50 0.6 0.4 9 Mechanical properties of deposited metal : 熔敷金屬的力學性能 Heat treatment / 熱處理狀態 Hardness / 硬度[HRc] As welded / 焊態 55-60 Stick Out: 30-35mm Thickness of deposition: 2-3 layers 焊絲外伸長度：30-35mm 熔敷厚度：2-3 層 Type of Current/Polarity/Welding Positions : 電流/極性/焊接位置